Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 10-12-2012, 11:06 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
oh test the B+ at the plate cap with the plate cap OFF and the tube out of the socket. with no load it should be very high, not a great test if you are getting some HV but a starting point. Really a better test for no HV.

HOT screen voltage will tell you a lot. tube 6CB5 pin 1 or 8 (screen) should be 172vdc, pin 3 or 6 (cathode) should be 7.5v and pin 4 or 5 (control grid) should be -40v

for testing the SHUNT TUBE you can siimply disconnect the 6BK4 plate lead (keep it clear of any ground, this will have FULL HV on it so be careful. disconnecting it will clear the shunt tube as a problem (if the HV comes back that is).

Last edited by DaveWM; 10-12-2012 at 11:49 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:06 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.