![]() |
|
|
|
#1
|
|||
|
|||
|
I am also at the extreme end of the vert hold to lock. I did not replace all the caps, there were some orange drops in there in the feed back circuit, I left them. I will try a new tube JIC its getting gassy or weak, but if that does not do it I will recap those old caps and check the resistors in the vert hold circuit and the pot as well.
|
|
#2
|
|||
|
|||
|
oh and what is the function of the metal disc on the back of the yoke plastic anyway?
went back and re reads Bobs article, magnetic shield, I presume from the yoke to the convergence area. Last edited by DaveWM; 10-07-2012 at 09:47 PM. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|