Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 10-07-2012, 04:31 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
contrast was a bit low, I had a new video out tube already, so a new 1st video amp and now the contrast is very good, can go from little to too much now.

I was trying to set up the purity so tried sliding the yoke back, and killing the green and red grids with 100k resistor to ground, when I powered it up, no HV. Popped a 3/4 fuse. My guess is I must have shorted out the yoke somehow. I monkeyed around with it some more and tried a new fuse, and got it back. I adj the purity and slid the yoke forward, got a nice full red screen. I am not sure what happened on the yoke but I will not mess with it again until after I have moved the CRT and fixed the plastic. I have a spare yoke so will experiment with it on making up the plastic piece. that way I can keep working on the set while getting the spare yoke ready to go. The center convergence is pretty good now, but the dynamic is still way off.

I have not yet tried adjusting the eff coil for lowest current. IIRC the service manual has you checking the voltage drop across the cathode fuse. I think I will just use my fuse adapter and plug that in with the current meter in place of the fuse to dip the cathode current.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:57 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.