![]() |
|
#6
|
||||
|
||||
|
"Am I wrong?"
Depends on the set. Color tube sets usually have three cathodes and three grids thus often the three cathodes are tied to the Y signal and the grids tied to R-Y,G-Y,and B-Y respectively. The Y signal is composed of a mix of RGB so if you have the R-Y and B-Y you can add them then subtract their sum from Y to get G-Y(which is what most tube R-Y/B-Y sets did). But I believe that some solid state sets just converted to pure RGB and fed only three video signals to the CRT due to having only one CRT grid in most inline tubes.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
| Thread Tools | |
| Display Modes | |
|
|