Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Transistor Portable Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 09-19-2012, 06:34 PM
AiboPet's Avatar
AiboPet AiboPet is offline
"micro" and quirky
 
Join Date: May 2012
Location: I'm in San Diego, but lived in Hong Kong for a long time
Posts: 707
It'll have a big 'ol regulator for sure. If there wasn't one, the picture would jump allover the place at the slightest voltage variation. You would usually see this if you turned up the volume. Same thing happens if you use a wall wart of too little amperage (usually these like to at LEAST see 750mA or so....more typically 1A).

Since you ARE getting "somethng"...such as it is, I would suspect you DO have power beyond the regulators and switches. Look closely at the flyback area....because you described a small "horizontal squeel" that then stops. Sounds ALOT like the horizontal oscillator starts, and then is shut down by a horizontal output or HV problem. Try looking at the set running in a dark room and see if the filaments are coming on behind the CRT. You should quite easily see the orange glow. Do you get ANY audio at all?
__________________
My current "holy grail" is trying to get enough parts together to get a Singer TV6U going. Been kicking my ass for nearly a year now :-P
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:13 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.