Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #24  
Old 09-17-2012, 01:10 AM
bob91343 bob91343 is offline
VideoKarma Member
 
Join Date: Nov 2010
Posts: 745
I believe that the wide prong on the polarized plug is connected to the cold, or low side of the line, so that's the one to set up to go to the chassis.

However, having said that, you can't trust that your outlets have been wired correctly, so it's still dangerous.

I have pondered this situation for years and have not found a satisfactory solution, short of using an isolation transformer. However, that isn't so hard to cobble up from a pair of filament transformers back to back. You only need, for most of these little sets, 20 Watts or so, which can be gotten from a pair of 6.3 V 3 A transformers.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:38 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.