![]() |
|
|
|
#1
|
||||
|
||||
|
Check the exact chassis number, there should be a suffix. The Sams index lists two different versions and I suspect the factory manuals break it down further.
__________________
Bryan |
|
#2
|
|||
|
|||
|
The tripler failed so you changed it now you just have a vertical line? Thats an interesting one....
The output transistors may be good but one of the small ones on the module may have failed. I have seen that in the xl100s. If you need a scan of the vertical circuit i can do it in the morning? ![]() ![]() ![]() ![]() :smok e:![]() ![]() ![]() ![]() ![]() ![]() :y es:![]() ![]()
|
|
#3
|
||||
|
||||
|
i tried the module in my other set.its good.transistor are good also.i will try the yoke this week.set is a ctc 58 chassis.i can use that scan.thanks to all!
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|