![]() |
|
#3
|
||||
|
||||
|
The first thing that I would do is re-solder all of the connections around the flyback xformer, horz output transistor(s?) and damper diode, as these connections tend to unsolder themselves over time. I have not had mine apart in over 15 years, when I replaced a failed damper diode with a better (faster) part, and re-soldered a bunch of connections.
jr Last edited by jr_tech; 09-03-2012 at 01:18 AM. |
| Thread Tools | |
| Display Modes | |
|
|