Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Expeditions & Passions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 07-24-2012, 09:27 PM
Opcom's Avatar
Opcom Opcom is offline
VideoKarma Member
 
Join Date: Jun 2012
Location: Dallas, Texas
Posts: 80
A voltmeter can tell you what's going on there. Besides the filament voltage, most VFD take 35-40V to light up. If it is installed in equipment, the anode or grid segments may be 'scanned' with a voltage from the display driver IC, each one in turn being high or low, to light up the desired segments. Don't be surprised if the filament is at a negative DC potential and the anodes near GND. A scope can show you what is being pulsed or scanned.

About the higher voltages, at some time, if you work with them, it can only make you a better tech and wiser collector.
__________________
Timeless Information for Retro-Tech Hobbyists and Hardware Hackers

No Kowtow
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:35 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.