Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 07-19-2012, 08:46 AM
DavGoodlin's Avatar
DavGoodlin DavGoodlin is offline
Motorola Minion
 
Join Date: Aug 2011
Location: near Strasburg PA
Posts: 3,505
The boosted B+ that screen controls get G2 voltage from has a bad electrolytic.
Possibly a sweep-derived voltage serving the video stages also.
If somebody could post a schematic of CRT and G2-video circuits, we could pick it out.
Reply With Quote
  #2  
Old 07-19-2012, 02:13 PM
TinCanAlley's Avatar
TinCanAlley TinCanAlley is offline
VideoKarma Member
 
Join Date: Sep 2008
Location: So Cal, CA
Posts: 1,026
Quote:
Originally Posted by DavGoodlin View Post
The boosted B+ that screen controls get G2 voltage from has a bad electrolytic.
Possibly a sweep-derived voltage serving the video stages also.
If somebody could post a schematic of CRT and G2-video circuits, we could pick it out.
I have a PDF of the schematics. It has all the boards, part lists and circuit diagrams. Only problem is that it is too large to attach here. Which boards are you needing? Is it the video output board (9-121)? That's the board attached to the neck of the CRT. It has the master G2 and the RGB G2s. If that's the board, I might be able to copy and past that info into another smaller file.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL

Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
Reply With Quote
  #3  
Old 07-19-2012, 08:56 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by DavGoodlin View Post
The boosted B+ that screen controls get G2 voltage from has a bad electrolytic.
Possibly a sweep-derived voltage serving the video stages also.
If somebody could post a schematic of CRT and G2-video circuits, we could pick it out.
IIRC, The boosted B+ filter cap is a section of one of the can type caps on the rear chassis.
Reply With Quote
  #4  
Old 07-19-2012, 11:11 PM
TinCanAlley's Avatar
TinCanAlley TinCanAlley is offline
VideoKarma Member
 
Join Date: Sep 2008
Location: So Cal, CA
Posts: 1,026
Quote:
Originally Posted by dieseljeep View Post
IIRC, The boosted B+ filter cap is a section of one of the can type caps on the rear chassis.
I've attached a PDF that has a rather large chassis schematic. Is the info needed somewhere on this? I get a bit lost trying to trace things and am not really sure what I really looking for. If it is on the schematic and can be pointed out, I'm sure I could then find it on the set (well, that's the hope).

Thanks!
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL

Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650

Last edited by TinCanAlley; 05-10-2026 at 06:14 PM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:29 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.