Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 07-16-2012, 04:32 PM
bob91343 bob91343 is offline
VideoKarma Member
 
Join Date: Nov 2010
Posts: 745
Open it, measure the primary voltage on the transformer, then the secondary voltage. If one reads something and the other doesn't, you have a bad transformer.

Else it could be a bad connection; the line voltage adjuster on tube testers sometimes opens up. Or there might be a fuse blown somewhere.

Don't assume it's the transformer unless your testing indicates that.

If you have no voltage at any setting, maybe the primary isn't getting any voltage.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:34 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.