![]() |
|
|
|
#1
|
||||
|
||||
|
Hmmmmm...Me Likey ! Looks to be in decent cosmetic shape, maybe its had an "Easy" life & the CRT is still good...As far as re-engineering it into a Color set....Uhh, I dunno if I'd REALLY wanna tackle THAT one...If you're willing to throw enuff money at something, yes, you CAN make a brick fly supersonic...But WHY ? Get yr Perdition working as good as new, & ENJOY it for what it is-A relic of a time gone past that, HOPEFULLY, will still work, & give you LOTS of pleasure for years to come...
__________________
Benevolent Despot |
|
#2
|
||||
|
||||
|
glenz is right. There is a ton of info out there on Predicta repair. They do kinda suck as the chassis that has a frame all the way around it and most of the way underneath it. Removing the circuit board from the frame is the biggest issue. The tube sockets are also very touchy. But other than that, they are not really much different than other sets. The CRT will be the big issue and since it seems that it's OK, you got unbelievable deal.
A conversion wouldn't really be very advisable. They made reproductions a few years back that you could find cheaper than trying to probably do it to that one. Plus that set has a good parts value, worst case scenario. The cardboard backs alone go for $40 and the plastic screen parts and the knobs bring nice money. Last edited by ggregg; 07-15-2012 at 07:23 PM. |
|
#3
|
|||
|
|||
|
Quote:
Quote:
Last edited by snelson903; 07-15-2012 at 07:26 PM. |
|
#4
|
|||
|
|||
|
man im running out of room ,its getting bad in the basement to many tv's at the same time started and not finished i wanted to go through some of my test equitment before got to this stage.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|