Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 07-10-2012, 12:21 PM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
I investigated Molex connectors when restoring my second Predicta, and decided that the drawbacks outweighed the convenience. In this article, scroll down to "Adding Quick Disconnects to the PC Board:"

http://antiqueradio.org/PhilcoH3412L...Television.htm

The boards on this TV don't have quite as many connectors, so they wouldn't get quite as cluttered as a Predicta. On the other hand, that means they are not as big a chore to remove in the first place.

By coincidence, yesterday I was in a hobby store, and as I suspected, they have a variety of teeny electrical connectors for RC applications. The only ones that looked good for this purpose are very small, round male/female connectors. They were quite expensive, of course. And they offer no real advantage over using a female Molex .062 connector as mentioned in the article.

When you service a board like this, I definitely recommend soldering the old wire-wrap leads back onto the pins.

Phil Nelson
Phil's Old Radios
http://antiqueradio.org/index.html
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:34 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.