![]() |
|
|
|
#1
|
|||
|
|||
|
if anyone has any pics of the chassis CRT mount hardware please post a pic, could use some help on how to best do that part.
|
|
#2
|
|||
|
|||
|
I just realized my T-120 mount hardware should be close to what I need so hopefully I can copy it to use to mount the 10BP4
|
|
#3
|
|||
|
|||
|
hmmm interesting the HV sags quite a bit (down to 6kv from 8kv) with max beam current in CRT. Think I subbed the HOT no change, next will be the damper. The HV rectifier is NOS. I wonder if its possible the resistor in the filament circuit could be high dropping the emission of the 1B3?
Looks like I got my wish some problems to trouble shoot ![]() for starters I think I will get my 1076 out and do the plate drive thing and see if it still blooms, that should isolate the problem some what. |
|
#4
|
|||
|
|||
|
corona discharge sound coming when HV down, not sure what happened but I think it may have been coming from around the HV anode. I was moving the chassis to try and get a better look and it stopped and the HV popped back up.
Time to call it quits for tonight |
|
#5
|
||||
|
||||
|
Quote:
I removed and reinstalled the CRT in my 8-T-241 a while back but I did not take any pictures. It is comparable to how a 630TS or 8TS30 holds its CRT; the center part of the front panel with the screen/mask unbolts from the rest of the front panel, which has a round hole larger than the CRT's diameter and some adjustable metal clips with rubber bumpers to hold the CRT's front rim centered. If Steve (Boobtubeman) built his mount for the chassis in his picture, that could give you ideas of what to make for yours. You need something that bolts onto or under the chassis and then supports the underside of the CRT, with a strap or other item around the top. Be careful!
__________________
Chris Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did." |
| Audiokarma |
![]() |
| Thread Tools | |
| Display Modes | |
|
|