Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 06-28-2012, 07:51 PM
gdunlapsd gdunlapsd is offline
VideoKarma Member
 
Join Date: Jun 2012
Posts: 16
Got it working now; replaced the 4.7M resistor and it made little difference; figuring I had nothing to lose at this point I tweaked the adjustment on the discriminator transformer a little (taking note of the starting position), and it made a huge difference - was able to get the volume up to normal on the FM side; however, it would go up and down with a pop, usually coming back if I pushed down on the discriminator tube.

I had cleaned all of the tube pins and sockets, so at first I was worried about the dreaded "Silver Migration Disease" I've heard about, but it wasn't crackling and didn't sound like "thunder" the way the symptom is usually described, so I figured there may be one or more cold solder joints. I reflowed the solder on all the connections under the discriminator tube and transformer, and now the FM volume is up to normal and it's no longer popping or cutting out.

I may ask a friend of mine for help doing an alignment sometime - he used to be a TV repair tech (including tube TVs from the old days) so he may know something about it, but for now it sounds pretty good.

Thanks again for the advice!
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:13 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.