Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 06-17-2012, 04:15 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Quote:
Originally Posted by old_coot88 View Post
The achilles heel of these sets was the solid state damper diode. The originals displayed a nearly 100% failure rate. ...
I wonder if a vacuum tube damper diode could substitute here. Assuming that there's room enough in the area of the chassis to mount a tube socket and the tube where there's enough ventalation and a source of heater power. However, the period of time it takes the tube to warm up means no damper diode action for around 15 seconds, and the horizontal deflection circuits may not like that... Forget that, maybe a SS damper diode from a CRT computer monitor would do it.
__________________
Reply With Quote
  #2  
Old 06-17-2012, 06:43 PM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
Quote:
Originally Posted by wa2ise View Post
Forget that, maybe a SS damper diode from a CRT computer monitor would do it.
I dunno.. the CTC-22's damper is a big honkin' thing that clips into a holder like a fuse. It has to be big and robust since it carries the full supply current of the HO tube just like a tube damper does. Whereas the damper diode in a monitor (or a SS TV) does not carry supply current but simply shunts across the HO transistor. So it's just a standard size diode.
Reply With Quote
  #3  
Old 06-17-2012, 07:41 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Quote:
Originally Posted by old_coot88 View Post
the CTC-22's damper is a big honkin' thing that clips into a holder like a fuse. It has to be big and robust since it carries the full supply current of the HO tube just like a tube damper does. ....
If the output is a tube, then the damper could also be a tube. So my idea wasn't so crazy. If there's enough room to install it. And if you are willing to modify the set this much.
__________________
Reply With Quote
  #4  
Old 06-17-2012, 08:13 PM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
Quote:
Originally Posted by wa2ise View Post
If the output is a tube, then the damper could also be a tube. So my idea wasn't so crazy.
Not at all. All it'd take is a 6.3V heater xfmr and a tube like a 6DW4 with a stand-off socket...
Quote:
...If there's enough room to install it. And if you are willing to modify the set this much.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:41 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.