![]() |
|
|
|
#1
|
|||
|
|||
|
finished sanding the legs one set off the rca and other the zenith ,i quess i wait then clear coat last thing
Last edited by snelson903; 10-14-2012 at 07:03 AM. |
|
#2
|
|||
|
|||
|
side panels removed and cleaned frame
|
|
#3
|
|||
|
|||
|
removed the tv orginal panel schematic transfer to photocopy, also found a factory repair on the production line ,iv noticed the upper right mighter joint didnt match the left now after removing side panel i see why,just loosen it it moved it over and re-glued it , i found that i had a sam's photofact allready in a lot i bought off ebay for this model so that worked out
Last edited by snelson903; 10-14-2012 at 07:05 AM. |
|
#4
|
||||
|
||||
|
If those leg caps are aluminum, they would shine up like mirrors with fine steel wool and water on the lathe...
|
|
#5
|
|||
|
|||
|
we can shine the legs for the rca on another show , im tired . when i restore the rca ill call it [ this old rca ] ha ha
|
| Audiokarma |
![]() |
| Thread Tools | |
| Display Modes | |
|
|