Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 05-16-2012, 11:41 PM
ChrisW6ATV's Avatar
ChrisW6ATV ChrisW6ATV is offline
Another CT-100 lives!
 
Join Date: Feb 2007
Location: Hayward, Cal. USA
Posts: 3,552
I looked at Pete's drawing and description of the production changes, and Nick's picture and description of his modification, and I understand the differences are these so far:

-Pete describes a production change in the HV regulator circuit that changes R183 (connected to the HV regulator grid and HV control wiper) from 1M to 150K, and moves C141 (connected to R183) from ground to flyback pin 1 (boost B+). (Pete also described nearby related changes to the vertical circuit as well.)

-Nick describes changing the HV control high-side from the low end of the DC convergence voltage divider to flyback pin 1 (boost B+) through an added 2M resistor (and grounding the low end of the divider).

These changes are independent, it seems.
__________________
Chris

Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did."
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:58 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.