Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 05-13-2012, 08:49 PM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
The Molex connectors are bigger than I expected, once I got one installed:



I bought 10 of those today, all the store had in stock. Maybe I'll go back there (or a hobby store) tomorrow and look for power pole connectors. I built an RC plane some years ago and do remember those connectors being smaller.

The Philco manual has a diagram that labels the connection points and tells what they connect to. This snippet shows WW connectors L38 and L46, etc., as well as ground connector G16:



I'm a little concerned about creating a mess of wires & connectors hanging over the board. The factory installation tucks the leads along and under the board edges. Things may get weird by the time you have three dozen connectors up above, leaving enough slack to unplug & plug things without accidentally snapping leads off the WW pins.

Edit: The powerpole connectors look about the same size as the Molex, 1-2/3 inch long when complete. They also appear to be the crimp-on type, which I like less than soldered connectors.

http://www.mouser.com/catalog/specsh...heet-42848.pdf

Phil Nelson

Last edited by Phil Nelson; 05-14-2012 at 01:16 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:43 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.