![]() |
|
|
|
#1
|
|||
|
|||
|
Nice. I remember when those came out. Zenith used that same design in the Chromacolor series as well. (which weighed a TON btw) IIRC.. this System 3 version has a little heft to it as well!
|
|
#2
|
||||
|
||||
|
Quote:
Jeffhs, thanks for the model number. The paper label with the torn corner(which I think is supposed to have the model number on it) is faded to the point that I can't tell if it ever had anything printed on it to begin with. I'm in the process of moving to a house down the shore a few miles from my apartment so I have no clue where I'm going to use this set yet, but I'll probably find a nice place for it. I'll have to be on the look out for the model the 60's manual goes with.....I love Zeniths so much that when I'm too swamped to seek them, they seek me.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
|
#3
|
||||
|
||||
|
I had no idea that the L1310C model we are discussing here had the System 3 chassis. Most System 3 models I've seen have the illuminated "spotlite" channel selector panels, Space Command remote control or both. The only thing I can figure is that the L1310C must have been a low-end, 13" version of Zenith's System 3 portables. In any event, I enjoyed mine, with its excellent Zenith picture. (In 1995 I received a 19" Zenith table set as a birthday present; it had the same great picture on cable -- I never used it on an antenna.) These sets were made, I would guess, about ten years before Zenith's television plant was moved from suburban Chicago to Korea.
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. |
|
#4
|
||||
|
||||
|
Do you plan on taking the back off of this set? Would love to see the innards....
__________________
"IPC 610 Class E & J STD-001 Certified" |
![]() |
| Thread Tools | |
| Display Modes | |
|
|