Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 05-06-2012, 12:42 PM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
I'm currently working on a 17" Predicta (Siesta). After restoring my barberpole, I was really really really motivated to do this one without removing the main board.

I don't think you can do a thorough restoration without pulling the board. Yes, many of the caps can be clipped and pigtailed from above, but this one had a bunch of resistors far off tolerance. I suppose you could crush the old resistor and cut it in half, leaving enough of a lead to connect a pigtail. By the time you're done with that monkey business, you could have removed the board and done it right in the first place. And your board won't look like an Alley Oop product.

I do intend to run a ground bus around the board, as with my other Predicta.

Phil Nelson
Phil's Old Radios
http://antiqueradio.org/index.html
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:46 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.