Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 04-24-2012, 11:53 AM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
Yah, I'd make an effort to repair it if you have enough of the pieces to make it structurally sound. Two-part epoxy would be my choice, too.

Once glued together, if there are some gaps, they can be filled with bondo. Then you can sand as needed and repaint.

Casting a reproduction is not rocket science, but it requires an intact original to make the mold. If you repair your ring well enough to serve as the model for making a mold, then presumably it's repaired well enough to use. An alternative would be to fabricate an entirely new model out of clay or whatever, which exactly matches the original, and use that as the model.

I have made simple one-piece molds in the past. This thing might require a two-piece mold. It's also a rather large object. Neither factor makes reproduction impossible, but they would make it more complicated.

Phil Nelson
Phil's Old Radios
http://antiqueradio.org/index.html
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:17 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.