Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 04-23-2012, 03:32 AM
colorfixer's Avatar
colorfixer colorfixer is offline
VideoKarma Member
 
Join Date: Aug 2005
Posts: 349
From Wikipedia's article on Oz:

"It was also very common (and even an FCC requirement for early color broadcasters) for TV stations to turn off the color portion of their transmission when broadcasting a black and white show or movie. This was because unusual colors or "color noise" could be seen during the showing of black-and-white programming under some conditions. Though the opening Kansas scenes in The Wizard of Oz were meant to be shown in sepia and though the sepia was restored to the film in 1989 for the film's 50th anniversary VHS and laserdisc reissue, a few local CBS affiliates still showed the sepia portion of the film with the color signal disabled for many years.[citation needed] Most of these were small market affiliates that ran some syndicated black-and-white shows as these stations were used to turning the color modes off during black-and-white programming. One CBS affiliate, WGNX, transmitted the opening Kansas scenes in black and white as recently as its 1996 showing because this station was an independent station that ran a moderate number of black-and-white films before becoming a CBS affiliate.
Reply With Quote
  #2  
Old 04-24-2012, 09:35 AM
cbenham's Avatar
cbenham cbenham is offline
VideoKarma Member
 
Join Date: May 2006
Posts: 471
Quote:
Originally Posted by colorfixer View Post
From Wikipedia's article on Oz:

"It was also very common (and even an FCC requirement for early color broadcasters) for TV stations to turn off the color portion of their transmission when broadcasting a black and white show or movie. This was because unusual colors or "color noise" could be seen during the showing of black-and-white programming under some conditions.
The FCC finally ended the practice of turning off burst for B&W programs in the early 1980s because the broadcast studio TV gear being manufactured then required the incoming signal to contain "sync coherent subcarrier". This means that the color subcarrier and the sync signal had to be locked together and mathematically related or the equipment would not pass the video signal. To broadcast a B&W film, I devised a way to turn off the I and Q video in the filmchain camera while still leaving the color burst on in the monochrome video output. This way the color shading problems in the filmchain camera were not visible to the viewers with color sets.
Cliff

Last edited by cbenham; 04-24-2012 at 09:43 AM. Reason: clarification.
Reply With Quote
  #3  
Old 04-24-2012, 12:33 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,815
Quote:
Originally Posted by cbenham View Post
...To broadcast a B&W film, I devised a way to turn off the I and Q video in the filmchain camera while still leaving the color burst on in the monochrome video output. This way the color shading problems in the filmchain camera were not visible to the viewers with color sets.
Cliff
Bless you!

By the way, is there a problem with your personal email? I copied you on a couple of things recently and saw no response.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:56 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.