Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 04-18-2012, 08:33 PM
holmesuser01's Avatar
holmesuser01 holmesuser01 is offline
VideoKarma Member
 
Join Date: Jul 2005
Location: Asheville NC
Posts: 1,731
Quote:
Originally Posted by dieseljeep View Post
If that set has the T995 chassis or simular, check for loose connections on the large mother board. It's a large board that has a lot of flex.
I've soldered many of these sets. Lots of ground connections and all the little stakes that the modules plug onto. Also, check the connections on the actual modules. They like to crack.

Best of luck for you getting this one fixed.
Reply With Quote
  #2  
Old 05-01-2012, 04:15 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Quote:
Originally Posted by holmesuser01 View Post
I've soldered many of these sets. Lots of ground connections and all the little stakes that the modules plug onto. Also, check the connections on the actual modules. They like to crack.

Best of luck for you getting this one fixed.
I've seen this alot on T991/T995/T809/T815. I've even seen quite a few of the newer C1/C2 chassis TV's that had loose connections on the electronic tuner modules; so, Magnavox had a little problem with loose connections during the '70's and early '80's.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:18 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.