Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 04-17-2012, 11:01 AM
kx250rider's Avatar
kx250rider kx250rider is offline
REAL TVs have TUBES!
 
Join Date: Oct 2005
Location: Los Angeles & Dallas
Posts: 3,239
I agree on that safety cap.. Replace first, and then if the set still kicks the circuit breaker out, you may have a bad HV tripler (the gray box with the anode lead from it, up to the top of the CRT). Those leaked a lot, and caused a heavy load on the power supply. Easy to verify; carefully unsolder and secure AWAY from any metal, the black wire from the tripler going to the flyback. Turn the set on, and see if it still shuts off. If not, the tripler is bad. But again, watch out for that black wire while you have it off the terminal. The RF can arc an inch or more, and will cause damage to other parts, or of course cauterize a hole in your finger ;-). Also, when you resolder that wire, use black silicone RTV sealant to cover it with a blob, so as to protect it from arcing later.

Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:39 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.