![]() |
|
|
|
#1
|
||||
|
||||
|
The next biggest B&W CRT was the 27"... I think there were at least 4 versions made by various CRT makers.
__________________
John Folsom |
|
#2
|
||||
|
||||
|
Nice job on those schematics John. That must have taken a lot of time and patients to trace and draw. Good Job!
__________________
Vacuum tubes are used in Wisconsin to help heat your house. New Web Site under developement ME http://AntiqueTvGuy.com |
|
#3
|
||||
|
||||
|
Hi John,
Wow: this is an amazing set. Looks like you are going to have lots of fun with this one. I will stay tuned for more. I reviewed your drawings and I spotted one thing I cannot figure out. It looks like you specified for V10 a 6BQ6 for the vertical output. The control grid has a 500ufd/ 50volt capacitor on the control grid I cannot make sense of. The 500ufd would have to me been more appropriate as the cathode resistor bypass capacitor. Terry |
|
#4
|
|||
|
|||
|
IIRC, Admiral used the magnetic focused 27" glass CRT's. RCA was famous for the 27" metal cone CRT. Magnavox used the electrostatic focused glass CRT's, to the mid-60's. The last one being the solid state B&W chassis. All were 90 degree deflection.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|