Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 04-15-2012, 02:13 PM
John Folsom's Avatar
John Folsom John Folsom is offline
VideoKarma Member
 
Join Date: May 2004
Location: Melbourne Florida
Posts: 932
Continuing... I decided to pull the sweep/power supply chassis and examine it, as it looked unusual. It turns out to be a rather unique configuration,
with separate transformers driving the sweep and HV. I also noted that the whole chassis was put together with nuts and screws, no rivets.
It also has no tags, labels, ink stamps or markings of any kind.






The TV chassis is clearly a more conventional production chassis, though some sort of a modification of what was probably a standard B&W production chassis.
It uses rivets, but once again, has no stamps or markings, other than one little paper label which proudly proclaims the chassis is union made.
All of this leads me to think I will likely not find any documentation for the set.



As I would be a bit reluctant to start recapping the set without a schematic to fall back on, I resolved to trace the wiring and generate a schematic.
Here is the result. The only unknown I found was one crisyp carbon comp ˝ watt resistor, shown as R? on page 1, in the B+++ side of the primary of T1.
Does not look like it will be any trouble to S.A.T. a value for it.

I have reposted the two power supply schematic pages in a later post in this thread.

Next, I will generate a schematic for the TV chassis, containing the RF/IF/video/sync/V&H oscillators. To be continued....
Attached Images
File Type: jpg SWEEP:POWER SUPPLY CHASSIS 1.JPG (109.2 KB, 430 views)
File Type: jpg SWEEP:POWER SUPPLY CHASSIS 2.JPG (128.1 KB, 431 views)
File Type: jpg UNION MADE.jpg (75.7 KB, 408 views)
__________________
John Folsom

Last edited by John Folsom; 04-27-2012 at 06:45 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:29 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.