![]() |
|
|
|
#1
|
||||
|
||||
|
Interesting, at least it'll be easier to paint the housing than to buff it out, provided I can find some paint the right color.
As far as the logo I guess I'm stuck using what I have. My Holiday has a nice screen, it just needs a little polishing but it's not a stinker. I experimented with the stinky screen today, the inside was completely covered with white moldy stuff, however it simply washed right off in our parts washer. I can buff the face to a high shine with the headlight buffing materials but since it's cracked also I won't bother now, I might do it later since a cracked screen is better than no screen and I may put it back on the Holiday or offer it to someone who needs one. |
|
#2
|
||||
|
||||
|
Well since I'm staring to go full steam on this set I changed the title of my post to reflect that.
After my near disaster with my good replacement CRT (got it mounted up OK.) I decided to retest the original CRT from this set, well not original, original but a replacement 21FDP4 dated 1961. A little history on this set first, I bought this set and a Holiday off eBay from a local seller about 6-8 months ago, they are both in fair-good condition, complete except for some of the knobs, (the Holiday has it's original antenna!) the price of $300 for the pair and local pick up made them a bargain. Both CRT's checked bad at first, I gently rejuved one of them, not sure which one but probably this one. Tonight I retested it, I can't get the G2 to adjust so I just put it in the middle, at that setting it tests very good, even when I drop the heater a couple volts it takes a while to go down so I think this tube will make a good picture, with two good CRT's I should be able to make two good working Predictas, one Holiday and one Pedestal, that's the plan at least. I have a second Holiday that I am going to use for parts, it's kind of a hack anyway. I'll still be short a few knobs I think but one step at a time. |
|
#3
|
||||
|
||||
|
After I pulled the chassis last night I noticed the speaker was torn to bits, I though I had done it by letting the controls shafts get to it, I was mad for being so stupid.
I felt better somewhat when I discovered it was torn when I got it, someone at some time had shoved something through the grille and trashed it. I'll probably get it reconed if I can't find an exact replacement. What is it about speakers that drives people to shove sharp objects in to them? Even at Thrift Stores (or especially at Thrift Stores?) the first thing that happens is the dust caps get pushed in by idiots. Pictures: Speaker, Grille damage, Shot of chassis still installed. |
|
#4
|
||||
|
||||
|
Purists may cringe, but I'd be tempted to patch that speaker cone with tea bag paper and service cement, and see what it sounds like. These sets do not have hi-fi audio under the best circumstances. Maybe a patched speaker will sound as good as a new one.
Phil Nelson |
![]() |
| Thread Tools | |
| Display Modes | |
|
|