Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #18  
Old 03-24-2012, 11:33 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Zenith was not the only US TV manufacturer to use a crown type emblem on the front panels of their sets. Admiral did too, only theirs did not have an "A" in the center of the badge; Zenith's did have a "Z" right in the middle. Also, Zenith cleverly put the pilot light on their H511 series radios behind the "Z" crest emblem on the front panel. It looks nice when it works, but when it burns out it overloads the series string, causing the 35W4 rectifier tube filament to glow an alarmingly bright orange due to the severe overload. If the bulb is not replaced promptly, the rectifier and possibly other tubes in the string will burn out, so it was not there simply for decoration; it was an essential part of the filament circuit. It's a #47 lamp, but I don't know if those are available anymore so I don't use my H511 much these days.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:39 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.