![]() |
|
|
|
#1
|
||||
|
||||
|
Quote:
jr |
|
#2
|
||||
|
||||
|
Quote:
Yes. When I watch WGN America it always shows on my TV's OSD as NTSC. I just turned on my flat screen and set it to WGN a moment ago. The on-screen display on my TV (in a small blue box in the upper right-hand corner of the screen) reads as follows: ATV 15.0 WGN NTSC There is no info box across the bottom of the screen (showing program title, channel, signal strength, etc.) when this channel is selected, which is another indication that the station being viewed is being received as NTSC. The info box only displays when the channel you are watching is digital and/or HD; if a program is being received as ATSC (digital), the resolution is displayed on the OSD as well, below the station call sign. I don't know if it's my TV (or the cable) downconverting WGN's HD signal to NTSC or just what is going on. However, I know WGN's nine o'clock newscast is presented in HD, as the intro to the broadcast clearly shows WGN 9 Midday News HD, with the "HD" in large silver-blue letters. This also is displayed when the program breaks for commercials, and, of course, at the end of the broadcast. If you tune in WGN's newscast at ten p. m. Eastern time (or whatever your local time zone is; the broadcast airs at nine pm Central time) you will see what I am referring to.
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. Last edited by Jeffhs; 03-24-2012 at 10:46 AM. |
|
#3
|
||||
|
||||
|
Quote:
jr |
|
#4
|
||||
|
||||
|
Quote:
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. |
|
#5
|
||||
|
||||
|
There is no question in my mind that the WGN news is produced and distributed in HD, (digital, 16x9, either 720p or 1080i).
However, it appears that your local cable company converts WGN programming to NTSC before distributing it in the lower tier cable channel. Check your OSD during the newscast to determine what you are actually receiving. jr |
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
I wouldn't have known it, however, if not for the indicator on my TV's OSD channel display, as my 19" Insignia flat screen is not the best in the world as far as displaying high-definition video goes. I saw a table in an article on HDTV recently that showed the optimum viewing distances for various sizes of flat screens, and found that, as far away as I sit from my set (ten feet), the minimum screen size required to realize the full HD experience is 40 inches. For a 19" FP like mine, the optimum distance is just four feet from the screen.
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. |
|
#7
|
||||
|
||||
|
So at your level of service, without using a cable box, you receive some NTSC and some "clear QAM" channels... are any of the channels that you receive actually full HD (720p or 1080i) ?
I suspect that you would have to subscribe to a higher tier, and use a cable box to get true HD, but perhaps the local channels might come through as HD??? jr PS: For a first time HD set, I usually recommend that it be at least 50% larger than the NTSC CRT set that it replaces. Last edited by jr_tech; 03-28-2012 at 02:02 PM. Reason: add ps |
![]() |
| Thread Tools | |
| Display Modes | |
|
|