|
"The 1500 in the Sams parts list and schematic means MMFD. The header at the beginning of the capacitor section says, "Capacity values given in the rating column are in mfd. for electrolytic and paper capacitors, and in mmfd. for mica and ceramic capacitors."
Ok I think I'm finally getting it. The fact that it's listed as "1500" tells me that it's a mica or ceramic.. if it was a molded paper cap the value would be higher. The small size (large number because of the listing method) tells me it's a mica or ceramic. For example C11 is probably a mica or ceramic it's listed as 1000.
I see where I could have also made the connection by looking at the schematic which shows C66 capacitor as a 1500 mmf, then looking at the chart and seeing that it was listed as 1500 would tell me it's a mica or ceramic. The reverse also being true that if I saw it on the schematic as a 1500 mmf and the parts list showed it as .00015 I could think it was a molded paper cap but that listing would give me doubt because of the small size..
Could I conclude that by looking at the schematic and the parts list I could make a list of the Caps I would want to replace and then go look over the chassis for confirmation?
Last edited by charokeeroad; 03-19-2012 at 03:19 PM.
|