Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #22  
Old 03-09-2012, 09:52 AM
Zenith26kc20's Avatar
Zenith26kc20 Zenith26kc20 is offline
VideoKarma Member
 
Join Date: Apr 2009
Location: New Orleans
Posts: 860
High voltage 23 KV, screen voltage 160 volts, cathode current 201 milliamperes. Now the real problem, my Sam's Photofact is very different than the set. Screen resistors in Sam's says a 16k 4 watt with a 120k 2 watt in parallel. Mine has a 56k 2watt in parallel with the 16K. I put resistors in series with the 47 ohm to the screen grid to lower the screen to what Sam's says, and the cathode current dropped to 170 milliamperes. About 1 inch of width missing, poor focus, reduced vertical and a generally dismal picture. I reconnected everything as original and ran the set for 15 minutes. Glorious picture. After 15 minutes, shut it off and touched the flyback. Barely warm! Tried two meters for the current, analog and digital, both the same. Ohmed the screen circuits, all OK. Horizontal drive is -57 volts. The Sam's says CTC9F is in the bunch. Mine is a CTC9F. Anyone have an RCA schematic with these values?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:36 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.