Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Flat Panels & Digital Format

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #17  
Old 03-08-2012, 03:04 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
No joy yet. I was hoping that the voltage measurements on the 3 terminal regulators might turn up a dead one, but they all seem to be producing voltages that are within reason for these devices. It is possible that one or more of these chips is not producing the correct voltage, but I have no way of telling without a schematic. I expected to find an indicator of the expected voltage on the board or chip number ( such as LD1117 3.3 for a 3.3 volt regulator), but no such luck! Still researching...

jr
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:07 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.