Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 03-03-2012, 09:48 AM
Reece's Avatar
Reece Reece is offline
VideoKarma Member
 
Join Date: Jul 2004
Location: Cleona, PA
Posts: 2,178
Look at the electrolytic caps. They have a crease mark or marks on the exposed top of the aluminum can which is designed to break open and allow a controlled release of pressure rather than a pop when they go bad. Really bad ones will have opened enough to ooze goop either on top or around the bottom of the cap. Don't confuse the ooze with sealant sometimes used to anchor caps to the board. Ones going bad will often bulge the top. Tops need to be completely flat to be "probably" OK.

If you search on line for images of failed electrolytic caps you'll find lots of pictures of them. Here's an example of a good one and a bad one side by side. Sometimes the bad one will have oozed its orangish innards out.

https://us2.ixquick-proxy.com/do/spg...loatedcaps.jpg
__________________
Reece

Perfection is hard to reach with a screwdriver.

Last edited by Reece; 03-03-2012 at 09:57 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:43 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.