|
|
|
#13
02-29-2012, 12:44 PM
|
|||
|
|||
|
horz sync pulse was clean and right at the correct PP of 10v. the flyback pulse was clean but a little under PP at 13v vs 20v. If the cleaning of the horz hold pot does not resolve it I will check another working philco chassis just to see if the PP on it is also lower than the SAMs. It sure helps sometimes to have a working set that you can confirm thins on. will also check the triode section voltages of the horz AFC tube.
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode