![]() |
|
#12
|
||||
|
||||
|
Thanks everyone, Tom I like your test of "shorting cathode and grid together at the CRT socket". I just want to be sure I understand how to do this without creating sparks and explosions lol.
Here is an image of the schematic, is the cathode Pin 11 and if so which pin is the grid pin 2 or 10 or both 2 and 10? If I understand you correctly I should put the cap on the picture tube, but not all the way down. Then take a jumper cable and short pin 11 to pin 2 or 10? Thanks again for you help.
|
| Thread Tools | |
| Display Modes | |
|
|