Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 02-05-2012, 11:21 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
just fooling around with it I found that if I put a 22meg resistor between the focus pin and ground, the focus comes in nicely (at about 3.5kv) I did not check the screen voltages on the CRT, I assume the focus is done by some electrostatic deflection between the focus screen and the G2, but not sure about that. This set uses a pot that goes between two leads off the fly, maybe on side of the pot is open (low side of fly take off lead). well at least I know the CRT can focus, just need to work on the voltage.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:57 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.