![]() |
|
|
|
#1
|
||||
|
||||
|
I'd definitely pay 50$ for a back for my CTC4....once I can lay my hands on that kind of money that is.
Do those backs have the labeling on them, and the CRT neck box (I can't remember the proper term) reproduced as well?
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
|
#2
|
||||
|
||||
|
The backs are not printed and of course you will have to figure out something for the cardboard doghouse too.
__________________
Vacuum tubes are used in Wisconsin to help heat your house. New Web Site under developement ME http://AntiqueTvGuy.com |
|
#3
|
||||
|
||||
|
Way back when I used to draw PC board layouts on what I recall was Autocad version 2.6 .
That was back before auto router programs were common. The machine was something like a CompuAdd 286 with warp drive.
Last edited by Kevin Kuehn; 01-31-2012 at 08:15 PM. |
|
#4
|
||||
|
||||
|
MSRP of autocad is $3995, I don't think that qualifies as "inexpensive" When we bought ProfileLab, it was $2000 and I dont consider that inexpensive either.
You can get older versions very cheap, I got Autocad version 13 for 30.00 and it was unused. Where I used to work they used fabricad to make dxf files for cnc lasers and turrent presses. They mainly used laser to cut sheetmetal, but did some jobs cutting formica, plastics, even plywood and leather. |
|
#5
|
||||
|
||||
|
Quote:
__________________
Vacuum tubes are used in Wisconsin to help heat your house. New Web Site under developement ME http://AntiqueTvGuy.com |
| Audiokarma |
![]() |
| Thread Tools | |
| Display Modes | |
|
|