Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #18  
Old 01-26-2012, 03:13 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
If you are near a very powerful station, say 10, 25 or 50kW (!), an arrangement like this could probably be heard at much greater distances. The transmitters for most Cleveland AM stations, for example, are located in a west-side suburb of the city, and if you are anywhere near them, an amplified crystal set tuned to any of them would probably be so loud as to be annoying, if not downright unbearable; an ordinary free-power set probably could drive a small loudspeaker to a decent listening volume.

The other problem with all crystal sets is poor to downright non-existent selectivity. If you are very near one or more high-power stations, your galena-crystal radio would have the heck of a time separating the signals; in fact, I think you would only hear a mishmash of noise, as your set received all the stations at once. I had a Remco crystal set when I was a kid. The radio worked well enough (using a 50-foot wire antenna in my back yard) to receive the local station in the next town west of me, and I'll never forget the time when, after that station signed off (it was an 0.5-kW daytime only station at that time, late 1960s-early seventies), I actually heard a faint signal from a top-40 rock station in the city of Cleveland, the transmitter being in a western suburb. The station itself was not that powerful, either, only running 5kW daytime and, IIRC, 1kW or less at night. I was living at the time in a Cleveland suburb some thirty miles from the transmitters of all the city's radio and TV stations, so I was surprised -- nay, astounded -- to hear that 5kW station on a crystal set, albeit faintly, like a gnat sighing through a window screen at 10 paces. The only thing I can figure is the propagation conditions that night must have been unusually good. Never heard any other Cleveland stations on that Remco free-power radio, though, and the radio itself is long gone.


I hate to think how loud Cincinnati's WLW must have been on crystal sets when that station was running its 500-kW transmitter in the 1920s-'30s. A plain crystal set without an amplifier would have picked up the station with room-filling volume, and then some; one could probably use a speaker in place of headphones easily. However, I would hope that any crystal set driving a loudspeaker, with or without an amplifier, would have some sort of output limiter or even an actual control to allow the listener to reduce the volume if desired or if necessary -- especially if listening to a close-by 50-kW station.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:54 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.