![]() |
|
#16
|
||||
|
||||
|
Next-door terminal syndrome, where you have a bunch of components crammed onto terminal strips. You're replacing a few components in a tightly packed area and then the doorbell rings or the dog knocks over a lamp. When you return, you solder a loose lead to the next-door terminal instead of the correct one.
The chassis is in the cabinet right now, so I can't check, but it was one of the small .1 caps (C511 or C512, probably C512) on the grid of the vertical output tube. The wrong connection tied it to C517, the 560pf cap on a plate of the horizontal AFC/oscillator tube. Groan. Small wonder the vertical & horizontal signals were tripping over each other. In hindsight, I should have double-checked my work before looking for fancier causes, but it wasn't completely wasted time, as I always learn something from these debugging sessions. Anything that sends me back to my old TV books is helpful in the long run. And now I'm confident there are no marginal components left in this TV's sweep sections. Regarding flybacks, it's good to know that different types won't all test the same. My 721TCS also has a laminated core, so my 1077B is probably working after all, as long as I use it for the purpose intended. Phil Nelson Phil's Old Radios http://antiqueradio.org/index.html |
| Thread Tools | |
| Display Modes | |
|
|