![]() |
|
|
|
#1
|
||||
|
||||
|
That makes sense in fact; I know in my NTSC-watching days (specifically, with indoor antennas), Channel 2 was always the worst-looking and hardest to receive clearly. Channels 4 and 5 were better but often not great, and Channels 7, 9, and 11 almost always were easy to receive well.
One of the nice side benefits to the switch to ATSC is that most stations moved to UHF. Now if they would only get rid of the silly fake "channel" numbers left over from the old days.
__________________
Chris Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did." |
|
#2
|
|||
|
|||
|
Quote:
|
|
#3
|
||||
|
||||
|
Most stations may have switched to UHF digital channels, but there are a few holdouts. For example, in my area, channels 3 (NBC) and 5 (ABC) are on UHF digital assignments but the DTV channel for CBS channel 19 in this area is actually VHF channel 10. Moreover, channel 8, the FOX affiliate here, is still on a VHF digital channel but will eventually move to, IIRC, channel 31, if I am to believe what I have been reading lately on Ohio Media Watch. Channel 19 has no plans that I am aware of to move its DTV assignment to UHF, although since this area is close to Lake Erie and a Canadian TV station on channel 10, the Cleveland station might well interfere with the latter, even though Canada's DTV transition is complete.
I am surprised channel 19 did not either stay on its original channel position (or else move to another UHF channel) after the transition. It would have made more sense for this station to have remained on 19, as did a station 60 miles south of here on channel 23. The latter, the ION television network affiliate for this area, was able to remain on 23 even after the DTV switch. I don't know how it is possible for a television station to switch from analog NTSC to ATSC digital while remaining on the same RF channel, but somehow 23 did it.
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. |
|
#4
|
||||
|
||||
|
Technically it is very easy to change from analog to digital just by swapping exciters, although meeting the strict out-of-band radiation limits could prevent doing it that simply (some high-level filtering may be required). A few stations (mainly public broadcasting, I believe) requested and got permission to do a direct cut with no transition period of dual broadcasts. In one of the cases I read about, they determined that only 3% (IIRC) of their audience was using the over-the-air signal, since they were serving a large state-wide area rather than a single concentrated urban population.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|