Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 01-09-2012, 02:16 PM
Broker57's Avatar
Broker57 Broker57 is offline
VideoKarma Member
 
Join Date: Mar 2009
Posts: 11
Tom: thanks for the advice. I figured I would start on a radio, but if the opportunity came along to get one of the TV sets working too...

I have the tube tester and VOM. On the first set I wanted to tackle I just found a schematic as well.

I have heard two schools of thought on the electrolytics: some say replace them prior to even turning the set on, and others have said to test the tubes and then turn on the set, and if there is no hum and the cans aren't hot then there shouldn't be a problem.

Other threads have also suggested warming the set up the first time using a variac, something I don't own and I have no experience with. Would this be a recommended purchase?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:51 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.