Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #13  
Old 01-08-2012, 05:16 PM
Ampico-kid's Avatar
Ampico-kid Ampico-kid is offline
VideoKarma Member
 
Join Date: Mar 2007
Location: Harpers Ferry, WV
Posts: 340
Quote:
Originally Posted by IsthmusTV View Post
I did try static convergence first, and I could get the blue dot to move only so far. The lateral positioning magnet did have a large effect on the static convergence, but it's very loose when I rotate it. Is is possible that I need to reposition the convergence yoke?
-Clark
If you pull the sliding magnet out of it's respective track for whatever particular color is giving you grief, and rotate it 180 degrees and then reinsert it, that might give you the movement that you need to align the beams.

You certainly can move the convergence yoke around to find the most effective position for it. Sometimes just a slight rotation right or left will bring things more into alignment. And as was mentioned by Steve, before you go any further...get your hands on a good degaussing coil and get the purity set up properly.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:05 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.