weird lytics

[DaveWM]

I used a reactance calc online, plugged in 900uf at 120hrz came out to 1.5ohm approx, for for voltage I would look at the circuit, that high a uf makes me think its a cathode bypass, so prob low voltage.

[stusnyder]

Originally Posted by DaveWM

I used a reactance calc online, plugged in 900uf at 120hrz came out to 1.5ohm approx, for for voltage I would look at the circuit, that high a uf makes me think its a cathode bypass, so prob low voltage.

It is low voltage, the can has 6vdc marked on it.

[mbear2k]

Is it possible to identify them from the SAM's or Rider diagrams?

http://www.earlytelevision.org/tv_sc..._diagrams.html

[stusnyder]

Originally Posted by mbear2k

Is it possible to identify them from the SAM's or Rider diagrams?

http://www.earlytelevision.org/tv_sc..._diagrams.html

Sams does not state it in mfd. Horizontal center control bypass is the ID of it.

[mbear2k]

Maybe C278?



Which looks like a 100uf at 25v.



This is from the TV Rider on the same page as above.

[stusnyder]

C4, C5, and C6 in sams. I figure a 1000 uf at 25 volts should be ok. Although C6 states 2000 uf.