![]() |
|
|
|
#1
|
||||
|
||||
|
I have a set like this. And the CM7000 box. Thinking I could merge the two, taking the S video output from the box and injecting it at the points downstream of the comb filter chroma-luma filter. Which then should give me a perfect NTSC picture without cross luma/chroma artifacts.
The CTC121 is a hot chassis, so I'd have to either place the box completely inside the TV set, or rework the audio/video inputs my CTC121 has to function as an S video buffer. I might be able to rework the CTC121's buttons to be wired to an extra CM7000 remote control board, and the output of that either hard wired or IR light connected to the CM7000 box buried inside the set... Just thinking out loud...
__________________
|
|
#2
|
|||
|
|||
|
It may or not be germaine to this set, but loss of luma can also be caused by a heater-cathode short in the CRT. On some of these with flyback-derived heater supply, i used to bypass a H-K short by floating the heaters, by cutting a trace on the socket board.
Gently rapping on the CRT neck will generally reveal a H-K short. |
|
#3
|
||||
|
||||
|
Forgot about the possibility of the tube being shorted heater to cathode. I've seen this before and yes tapping the neck of the crt can show you if it's the case or not. Also it can't hurt to touch up the connections on the video outputs(neckboard)...which runs pretty warm.
Bryan, I saw some of the negative comments about this set on the a.r.f. boards and to be fair, I don't think they are justified. These tv's had all the features of the day and were built to last. Also a similar chassis, the ctc-130 was pretty underrated IMO. Heavy yes, but that's a good sign in my book. MILES better than what 'RCA' put out in the 90s in a lot of ways. It'd be great to find the original remote control for this set--on some website I saw how advanced it was...way ahead of it's time (my set was an April, '84) Can anyone confirm if the 121 used genuine I-Q demodulation? |
![]() |
| Thread Tools | |
| Display Modes | |
|
|