![]() |
|
#10
|
||||
|
||||
|
Thanks for the explanation Bob!
I remember that Jr_tech wanted to know how the getthers looked. They look silver and dark gray to me.... ![]() ![]() I decided to pull the CRT yesterday here are some pictures. ![]() ![]() ![]() ![]() ![]() I've also slowly been cleaning 57 years worth of grime off the chassis. ![]() I've been recaping too. Here is the completed IF board. ![]() The two ceramic cased ones I managed to restuff, but the rest had "bakelitized" paper tubes the ends of which my soldering iron could not melt or even soften! I had to double up to get two of the values....I replaced a .027 with a .022 and a .0047 in parallel, and I replaced a .056 with a .047 and a .01 in parallel ( I know this not wonderfully exact, but it is an improvement over the .068 maroon drop that was in there). I also remounted the IF shield after the recap. ![]() With luck in the next couple of days I'll have the recapping done good enough to do a test power up. I have dug out of my stocks all the tubes this set needs except for the Damper, H output, HV rect., the 6CL6s, the 6AN8s, and the 6AZ8s (I managed to find a majority of RCA branded used and NOS tubes for this set ). I'm going to sift through my unboxed tubes and see if I have any. If not I'll see if nostalgiaair lists any sub types that I might have.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|