![]() |
|
#11
|
||||
|
||||
|
I powered the set up slowly and all seemed OK so I went for full power. I was really surprised to see a distorted image. A little control tweaking and I got a stable image
Those relacement vertical transformers are working just fine ![]() Barely any sound though ![]() ![]() After a little investigation, I discovered a broken antenna lead. Fixing that helped a little. ![]() Then, I tried rocking each tube in it's socket and, bingo!, a 6AL5 wasn't making good contact. Plenty of sound now ![]() ![]() Next, I hooked up a better signal source. The picture is pretty good, but rather dim. Not surprising really for an original CRT. ![]() I switched to a dead channel and I have vertical bars similar to the last set I restored with the same chassis. This time there's one pronounced stripe and several faint bars. I'll do some troubleshooting over the weekend. All in all, a very successful first power up ![]()
Last edited by bandersen; 12-17-2011 at 04:02 AM. |
| Thread Tools | |
| Display Modes | |
|
|