![]() |
|
|
|
#1
|
||||
|
||||
|
Nick,
Here's a couple pictures. Weird that the internal components do no match what the schematic shows. The 56pf cap is in the right place, but then the other cap is missing, and there's that 560 ohm resistor. I'm pretty sure the plastic cover had never been off, looks all original. The resistance readings check out ok. Maybe your TV schematic can shed some light on it. Anyhow, $15 if you can use it. I also replied to your pm over on ARF. Kevin |
|
#2
|
||||
|
||||
|
Quote:
Edit: your yoke has a 560 ohm resistor, mine has 5600... Wish mine had some good part numbers on it.
__________________
Evolution... |
|
#3
|
||||
|
||||
|
The specs with this one say 43 ohms Horz, 3.5 ohms Vert. I'm reading 44 and 3.1 ohm
I double checked with my Thordarson catalog and they give the same resistance values. |
|
#4
|
||||
|
||||
|
Something's fishy...
The Sams for this set says 43 ohms vertical, 13.5 horizontal. Here's a snapshot of the schematic.
__________________
Evolution... Last edited by miniman82; 01-29-2012 at 04:15 PM. |
|
#5
|
||||
|
||||
|
I agree. I don't know what to make of it. Possible SAMS is messed up as well. I guess at this point you need one or more other manufacture cross-references with specs, at least to come to some consistent conclusion.
Below is the complete spec sheet that was in the box. |
| Audiokarma |
|
#6
|
||||
|
||||
|
Maybe someone can see what yoke specs Riders lists for this TV?
Last edited by Kevin Kuehn; 12-04-2011 at 11:57 PM. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|