![]() |
|
|
|
#1
|
||||
|
||||
|
I have one NIB, but heck, I'd take Chesters up on that one for $10.
|
|
#2
|
||||
|
||||
|
Quote:
Quote:
__________________
Evolution... |
|
#3
|
||||
|
||||
|
Nick,
Here's a couple pictures. Weird that the internal components do no match what the schematic shows. The 56pf cap is in the right place, but then the other cap is missing, and there's that 560 ohm resistor. I'm pretty sure the plastic cover had never been off, looks all original. The resistance readings check out ok. Maybe your TV schematic can shed some light on it. Anyhow, $15 if you can use it. I also replied to your pm over on ARF. Kevin |
|
#4
|
||||
|
||||
|
Quote:
Edit: your yoke has a 560 ohm resistor, mine has 5600... Wish mine had some good part numbers on it.
__________________
Evolution... |
|
#5
|
||||
|
||||
|
The specs with this one say 43 ohms Horz, 3.5 ohms Vert. I'm reading 44 and 3.1 ohm
I double checked with my Thordarson catalog and they give the same resistance values. |
| Audiokarma |
|
#6
|
||||
|
||||
|
Something's fishy...
The Sams for this set says 43 ohms vertical, 13.5 horizontal. Here's a snapshot of the schematic.
__________________
Evolution... Last edited by miniman82; 01-29-2012 at 04:15 PM. |
|
#7
|
||||
|
||||
|
I agree. I don't know what to make of it. Possible SAMS is messed up as well. I guess at this point you need one or more other manufacture cross-references with specs, at least to come to some consistent conclusion.
Below is the complete spec sheet that was in the box. |
|
#8
|
|||
|
|||
|
Are you kidding. Chester the molester! If we had it we'd sell it for $10. I needed a 1DB3 HV rect. for a GE porta-color. They wanted to nick me $14 for it. I told them forget it! It's not an audio tube! Probably the last time I'll darken their door.
|
|
#9
|
||||
|
||||
|
Quote:
__________________
Evolution... |
![]() |
| Thread Tools | |
| Display Modes | |
|
|