Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 11-21-2011, 11:21 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
well while messing about with the tv I noticed the shunt tube seemed to be glowing hotter than normal (and the FLY was getting quite hot as well even though the HOT current seemed right a 185ma) I need to check the V drop across the shunt cathode resistor before doing anything else. The voltage regulation seems fine, able to dial in right at 23kv, but I did not check that shunt tube current so will do that before I do any more testing on the pairing issue. I did try several 6Gf7's much to my surprise the pic vert and lin remained pretty constant, as did the line pairing issue. It seemed like one tube did a little better but its not right. if I take it to the edge I can get rid of it, so I know there is room for improvement. My scope lead took a dump so I will have to fix that and go in search of horz rate noise.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:56 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.